Solar street light controller is mainly used for home, business district, factory, transportation, pastoral areas, communications and other solar power supply system. Here is a brief introduction to the solar street light controller mode and wiring method:
1, pure light control mode: when there is no sun, the light intensity dropped to the starting point, the controller delay 10 minutes to confirm the start signal, according to the set parameters to open the load, the load began to work; when there is sunlight, light intensity to start Point, the controller delay 10 minutes to confirm the closure of the signal after the closure of the output, the load stops working.
2, light control + time control mode: start the same process and pure light control, when the load to the set time to automatically shut down, set the time 1 to 14 hours.
3, manual mode: the mode of the user can control the load through the button to open and close, regardless of whether the day or night. This mode is used for some special loads or when used for commissioning.
4, debugging mode: used for system debugging, when the optical signal is closed load, no light signal load, easy installation and commissioning check the correct installation of the system.
5, normally open mode: the power load has been to maintain the output state, this mode is suitable for 24-hour power supply load.